Cisco PenTeleData 8800 Series Guide

Table 20: Parameters for Optional Network Configuration
Description and Default ValueParameter
The hostname of the server that the phone uses.
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Host_Name ua="rw">serverhost.com</Host_Name>
• On the phone web interface, enter the host name of the server to use.
Default: Empty
Host Name
The network domain of the Phone.
If you’re using LDAP, see LDAP Configuration, on page 295.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Domain ua="rw">domainexample.com</Domain>
• In the phone web interface, enter the domain of the phone.
Default: Empty
Domain
Specifies the sequence for selecting the DNS server.
Perform one of the following:
• Manual, DHCP
• Manual
• DHCP, Manual
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<DNS_Server_Order ua="na">Manual,DHCP</DNS_Server_Order>
• In the phone web interface, specify the order that the phone follows to select the
DNS server.
Allowed values: Manual,DHCP|Manual|DHCP,Manual
Default: Manual, DHCP
DNS Server Order
Specifies the mode of DNS query.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<DNS_Query_Mode ua="na">Parallel</DNS_Query_Mode>
• In the phone web interface, select the mode of DNS query.
Allowed values: Parallel|Sequential
Default: Parallel
DNS Query Mode
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
161
Cisco IP Phone Configuration
Parameters for Optional Network Configuration

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English