New and Changed SectionsRevisions
Enble _Early-Media SupportAdded a new task on how to enable early media
support
Profile Authentication
Specify the Profile Authentication Type
Added topics replacing the “Set up Profile Account”
topic to support the enhancements in profile
authentication
DND and Call Forwarding Status Sync
Enable Feature Key Sync
Enable Call Forwarding Status Sync via XSI Service,
Enable DND Status Sync via XSI Service
XSI Line Service
Added new fields and topics to support the feature of
DND and call forwarding status sync
Phone Configuration for Monitoring Other Phones
Added a new topic replacing the existing Busy Lamp
Field Configuration on a Monitoring Phone.
Enable Users to Configure Features on Line KeysAdded a new task on how to phone users to configure
speed dial and monitor a coworker's line.
Include a Device Identifier in Uploaded Syslog
Messages
Added a new topic about including a device identifier
in uploaded syslog messages.
Report a Phone Problem Remotely
PRT Status
Added new fields and a new task on how to remotely
report phone problems.
Optional Network Configuration
Added the Syslog Identifier field.
Configuration Profile
Replaced the Profile Account Enable parameter with
the Profile Authentication Type field
Updated the description of the Profile Rule parameter.
Upload Cofiguration Options
Updated Report Rule and added new parameters:
Report to Server, periodic Upload to Server, and
Upload Delay on Local Change.
Line Key
Updated the description for the Extension field.
LDAP Directory Paramters
Updated the description of the First Name Filter and
Last Name Filter fields.
Voice>Ext(n)>GeneralExample XML parameter configuration is added for
the Line Enable parameter.
Allocate a Key Expansion Module Type
Allocate a Key Expansion Module Type with the
Phone Menu
Added a new task on how to assign the new MPP key
expansion modules—Cisco IP Phone 8851/8861 Key
Expansion Module and Cisco IP Phone 8865 Key
Expansion Module
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
13
New and Changed Information
New and Changed for Firmware Release 11.2(3)
To Next Page
Loading...
Need help?
General