Cisco PenTeleData 8800 Series Guide

DescriptionParameter
Forwards no-answer calls to the extension specified
after the activation code.
Defaults to *92.
Cfwd No Ans Act Code
Cancels call forwarding of no-answer calls.
Defaults to *93.
Cfwd No Ans Deact Code
Enables call waiting on all calls.
Defaults to *56.
CW Act Code
Disables call waiting on all calls.
Defaults to *57.
CW Deact Code
Enables call waiting for the next call.
Defaults to *71.
CW Per Call Act Code
Disables call waiting for the next call.
Defaults to *70.
CW Per Call Deact Code
Blocks caller ID on all outbound calls.
Defaults to *61.
Block CID Act Code
Removes caller ID blocking on all outbound calls.
Defaults to *62.
Block CID Deact Code
Removes caller ID blocking on the next inbound call.
Defaults to *81.
Block CID Per Call Act Code
Removes caller ID blocking on the next inbound call.
Defaults to *82.
Block CID Per Call Deact Code
Blocks all anonymous calls.
Defaults to *77.
Block ANC Act Code
Removes blocking of all anonymous calls.
Defaults to *87.
Block ANC Deact Code
Enables the do not disturb feature.
Defaults to *78.
DND Act Code
Disables the do not disturb feature.
Defaults to *79.
DND Deact Code
Makes all outbound calls secure.
Defaults to *16.
Secure All Call Act Code
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
412
Cisco IP Phone Installation
Vertical Service Activation Codes

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English