Cisco PenTeleData 8800 Series Guide

DescriptionParameter
The time interval between periodic resynchronization with the provisioning server.
The associated resync timer is active only after the first successful sync with the server.
The valid formats are as follows:
• An integer
Example: An input of 3000 indicates that the next resync occurs in 3000 seconds.
• Multiple integers
Example: An input of 600,1200,300 indicates that the first resync occurs in
600 seconds, the second resync occurs in 1200 seconds after the first one, and the
third resync occurs in 300 seconds after the second one.
• A time range
Example, an input of 2400+30 indicates that the next resync occurs in between
2400 and 2430 seconds after a successful resync.
• In the phone configuration file (cfg.xml) with XML, enter a string in this format:
<Resync_Periodic ua="na">3600</Resync_Periodic>
• On the phone web page, specify the time period in seconds.
Set this parameter to zero to disable periodic resynchronization.
The default value is 3600 seconds.
Resync Periodic
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
50
Cisco IP Phone Provisioning
Profile Resync Parameters

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English