Cisco RV130 Administration Guide

2
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 12
Viewing Device Status
To ensure that data and statistics are frequently updated on Status pages, choose
a refresh rate from the Refresh Rate drop-down list.
Viewing the Dashboard
Choose Status > Dashboard to view a snapshot of the configuration of your
device. The Dashboard page displays information about your device’s firmware
version, CPU and memory utilization, error-logging settings, LAN, WAN, wireless,
site-to-site IPsec VPN, and PPTP VPN server settings.
To modify the information displayed, click the details link to go to the configuration
page for the section. For more information about managing the settings displayed
on the Dashboard page, see:
• Configuring Log Settings
• Configuring Basic Site-to-Site IPsec VPN
• Configuring LAN Settings
• Configuring Wired WAN Connections
• Configuring Basic Wireless Settings
From the Refresh Rate drop-down list, choose the rate at which the latest
statistics and parameter values are refreshed on the dashboard.
The Dashboard page also displays an interactive view of your device’s back panel
when you click Show Panel View. Mouse-over each port to view port connection
information.

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g