Cisco RV130 Administration Guide

Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 1
Contents
Chapter 1: Introduction 6
Verifying the Hardware Installation 6
Using the Setup Wizard 7
Configuration Next Steps 8
Using the Getting Started Page 8
Connecting to Your Wireless Network 10
Chapter 2: Viewing Device Status 12
Viewing the Dashboard 12
Viewing the System Summary 13
Viewing Active TCP/IP Services 15
Viewing Wireless Statistics 15
Viewing Captive Portal Status 15
Viewing Site-to-Site IPsec VPN Connection Status 15
Viewing the IPsec VPN Server Status 16
Viewing PPTP Server 16
Viewing Logs 16
Viewing Connected Devices 17
Viewing Port Statistics 18
Viewing the Mobile Network Status 18
Chapter 3: Configuring Networking 20
Configuring WAN Settings 21
Configuring Wired WAN Connections 21
Configuring DHCP 21
Configuring Static IP 22
Configuring PPPoE 22
Configuring PPTP 24
Configuring L2TP 26
Configuring Optional Settings 28
Configuring a Mobile Network 30
Configuring Global Mobile Network Settings 30

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g