Cisco RV130 Administration Guide

8
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 116
Managing Your Device
Setting Device Properties
Assign a name and a domain name to your device to ensure that it is easily
identified by other devices.
To set device properties:
STEP 1 Choose Administration > Device Properties.
STEP 2 In the Hostname field, enter a name to identify the device uniquely on your
network. For example, RTR141.
STEP 3 In the Domain Name field, enter the domain in which your device is located. For
example, abcbusiness.com. If you do not know the name of your organization’s
domain, contact your network administrator.
STEP 4 Save your changes.
Setting Password Complexity
You can enforce a minimum password complexity requirement for password
changes.
To configure password complexity settings:
STEP 1 Choose Administration > Password Strength.
STEP 2 In the Password Complexity Settings field, check Enable.
STEP 3 Configure password complexity settings:

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g