Cisco RV130 - Backing up and Restoring the System

Managing Your Device
Backing Up and Restoring the System
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 130
8
STEP 3 Click Save.
Backing Up and Restoring the System
You can back up custom configuration settings for later restoration or restore from
a previous backup from the Administration > Backup / Restore Settings page.
When the firewall is working as configured, you can back up the configuration for
restoring later. During backup, your settings are saved as a file on your PC. You can
restore the firewall settings from this file.
Adjust for Daylight
Savings Time
If supported for your region, check the Adjust for
Daylight Savings Time box.
This check box is dimmed if you click Manual in the
Set Date and Time field.
Daylight Saving Mode If you choose By date, enter the specific date when
daylight saving mode starts.
If you choose Recurring, enter the month, week,
day of week, and time when daylight saving time
starts.
Enter the appropriate information in the From and
To fields.
Daylight Saving Offset Choose the offset from Coordinated Universal
Time (UTC) from the drop-down menu.
Set Date and Time Choose if you want the date and time on the device
set manually or automatically.
If you select Manual, enter the date and time in the
Enter Date and Time fields.
NTP Server To use the default NTP servers, click the Use
Default button.
To use a specific NTP server, click the User
Defined NTP Server and enter the fully qualified
domain name or IP address of the NTP servers in
the two available fields.