EasyManuals Logo
Home>Cisco>Network Router>RV130

Cisco RV130 Administration Guide

Cisco RV130
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Configuring Networking
Configuring a Mobile Network
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 27
3
STEP 2 Click Save to save your settings
Bandwidth Cap Setting
The device monitors the data activity across the mobile network link and when it
reaches a given threshold, sends a notification.
To enable or disable Bandwidth Cap Tracking and set the limits:
STEP 1 Click Enabled or Disabled.
STEP 2 Select the Monthly Renewal Date from the drop-down list to indicate which day of
the month the bandwidth cap is reset.
STEP 3 In the Monthly Bandwidth Cap field, enter the maximum amount of data in
megabytes that is allowed to pass before the device takes an action, such as
sending an email to an administrator.
E-mail Setting
When the bandwidth data limit is reached, an email message can be sent to the
administrator. To set up the target email address, see Configuring Log E-Mailing.
When enabled by checking the box, email is sent when:
Mobile network usage has exceeded a given percentage.
The device fails over to the backup pathway and recovers.
Server Type The most commonly available type of mobile data
service connection based on your area service signal. If
your location supports only one mobile data service,
you can limit your preferred option, reducing connection
setup times. The first selection always searches for
HSPDA/3G/UMTS service and switches automatically
to GPRS when it is available.
LTE Service Long-term Evolution (LTE) Service setting. Auto chooses
a signal based on the area service signal. 4G only
searches for only 4G signals. 3G only searches for only
3G signals.
Field Description

Table of Contents

Other manuals for Cisco RV130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130 and is the answer not in the manual?

Cisco RV130 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
Dual-bandNo
Ethernet LAN (RJ-45) ports4
Supported network protocolsPPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management-
Security algorithmsAES
Product colorBlack
CertificationFCC, CE, IC
Input current2 A
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals