Cisco RV130 Administration Guide

Managing Your Device
Configuring User Accounts
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 117
8
STEP 4 Click Save.
Configuring User Accounts
Your device supports two user accounts for administering and viewing settings: an
administrative user (default user name and password: cisco) and a guest user
(default user name: guest).
The guest account has read-only access. You can set and change the username
and password for both the administrator and guest accounts.
Minimum Password
Length
Enter the minimum password length (0-
64 characters).
Minimum number of
character classes
Enter a number representing one of the following
character classes:
• Uppercase letters.
• Lowercase letters.
• Numbers.
• Special characters available on a standard
keyboard.
By default, passwords must contains characters
from at least three of these classes.
The new password must
be different than the
current one
Check Enable to require that new passwords differ
from the current password.
Password Aging Check Enable to expire passwords after a
specified time.
Password aging time Enter the number of days after which the password
expires (1–365). The default is 180 days.

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g