Cisco RV130 Administration Guide

Managing Your Device
Setting the Session Timeout Value
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 120
8
Setting the Session Timeout Value
The timeout value is the number of minutes of inactivity that are allowed before the
Device Manager session is ended. You can configure timeout for the Admin and
Guest accounts.
To configure session timeout:
STEP 1 Choose Administration > Session Timeout.
STEP 2 In the Administrator Inactivity Timeout field, enter the number, in minutes, before
a session times out due to inactivity. Choose Never to allow the administrator to
stay logged in permanently.
STEP 3 In the Guest Inactivity Timeout field, enter the number, in minutes, before a
session times out due to inactivity. Choose Never to allow the administrator to stay
logged in permanently.
STEP 4 Click Save.
Configuring Simple Network Management (SNMP)
Simple Network Management Protocol (SNMP) lets you monitor and manage your
router from an SNMP manager. SNMP provides a remote means to monitor and
control network devices, and to manage configurations, statistics collection,
performance, and security.
Configuring SNMP System Information
NOTE Before you can use SNMP, install SNMP software on your computer. Your device
supports only SNMPv3 for SNMP management and SNMPv1/2/3 for SNMP trap
messages.
To enable SNMP:
STEP 1 Choose Administration > SNMP.
STEP 2 Check Enable to enable SNMP.
STEP 3 Select the SNMP version in the Mode field.
STEP 4 Enter this information:

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g