EasyManuals Logo

Cisco RV130 Administration Guide

Cisco RV130
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Configuring Networking
Configuring Routing
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 39
3
Configuring Routing
Use the Routing page to configure the operating mode and other routing options
for your device.
Configuring the Operating Mode
To configure the operating mode:
STEP 1 Choose Networking > Routing.
STEP 2 In the Operating Mode field, select one of the following options:
STEP 3 Click Save.
Configuring Dynamic Routing
Routing Information Protocol (RIP) is an Interior Gateway Protocol (IGP) that is
commonly used in internal networks. It allows the router to exchange its routing
information automatically with other routers, and allows it to dynamically adjust its
routing tables and adapt to changes in the network.
Dynamic Routing (RIP) enables the device to automatically adjust to physical
changes in the network layout and exchange routing tables with the other routers.
The router determines the network packets’ route based on the fewest number of
hops between the source and the destination.
Gateway To set the device to act as a gateway.
(Recommended)
Keep this default setting if the device is hosting
your network connection to the Internet and is
performing routing functions.
Router (For advanced users only) To set the device to act
as a router.
Select this option if the device is on a network with
other routers.
Enabling the Router mode disables NAT (Network
Address Translation) on the device.

Table of Contents

Other manuals for Cisco RV130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130 and is the answer not in the manual?

Cisco RV130 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
Dual-bandNo
Ethernet LAN (RJ-45) ports4
Supported network protocolsPPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management-
Security algorithmsAES
Product colorBlack
CertificationFCC, CE, IC
Input current2 A
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals