Cisco RV130 Administration Guide

Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 2
Contents
Configuring Mobile Network Settings Manually 31
Bandwidth Cap Setting 32
E-mail Setting 32
Setting Failover and Recovery 33
Configuring LAN Settings 34
Changing the Device Management IP Address 34
Configuring DHCP Server 35
Configuring VLANs 37
Configuring Static DHCP 38
Viewing DHCP Leased Clients 39
Configuring a DMZ Host 39
Configuring RSTP 40
Port Management 41
Configuring Link Aggregation 42
Cloning the MAC Address 43
Configuring Routing 44
Configuring the Operating Mode 44
Configuring Dynamic Routing 44
Configuring Inter-VLAN Routing 45
Configuring Static Routing 45
Viewing the Routing Table 46
Configuring Dynamic DNS 47
Configuring the IP Mode 48
Configuring IPv6 49
Configuring the IPV6 WAN Connection 49
Configuring IPv6 LAN Connections 53
Configuring IPv6 Static Routing 55
Configuring Routing (RIPng) 56
Configuring Tunneling 57
Viewing IPv6 Tunnel Status 58
Configuring Router Advertisement 58
Configuring Advertisement Prefixes 60

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g