Cisco RV130 Administration Guide

Viewing Device Status
Viewing the Mobile Network Status
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 19
2
• Subnet Mask—Subnet mask of the USB device.
• Default Gateway—IP address of the default gateway.
• Connection Up Time—The length of time that link has been up.
• Current Session Usage—Volume of data being received (Rx) and
transmitted (Tx) on the mobile link.
• Monthly Usage—Monthly data download and bandwidth usage.
• Manufacturer—Card manufacturer name.
• Card Model—Card model number.
• Card Firmware—Card firmware version.
• SIM Status—Subscriber identification module (SIM) status.
• IMS—The unique identification associated with the GSM, UMTS, or LTE
network mobile phone users.
• Carrier—Mobile network carrier.
• Service Type—Type of service accessed.
• Signal Strength—Strength of the wireless mobile network signal.
• Card Status—Status of the data card.

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g