EasyManuals Logo

Cisco RV130 Administration Guide

Cisco RV130
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Configuring Networking
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 20
3
Connect on Demand Select this option if your ISP charges based on the
amount of time that you are connected. When you
select this option, the Internet connection is on only
when traffic is present. If the connection is idle—
that is, no traffic is flowing—the connection is
closed. If you click Connect on Demand, enter the
number of minutes after which the connection
shuts off in the Max Idle Time field.
Keep Alive When you select this option, the Internet
connection is always on. In the Redial period field,
enter the number of seconds after which the
device attempts to reconnect, if it is disconnected.
Authentication Type Choose the authentication type:
Auto-negotiationThe server sends a
configuration request specifying the security
algorithm set on it. The device then sends back
authentication credentials with the security type
sent earlier by the server.
PAPThe device uses the Password
Authentication Protocol (PAP) to connect to the ISP.
CHAPThe device uses the Challenge Handshake
Authentication Protocol (CHAP) when connecting
with the ISP.
MS-CHAP or MS-CHAPv2—The device uses
Microsoft Challenge Handshake Authentication
Protocol when connecting with the ISP.
Service Name Enter a name for the new PPTP service.
MPPE Encryption Check the Enable check box to enable Microsoft
Point-to-Point Encryption for the PPTP connection.

Table of Contents

Other manuals for Cisco RV130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130 and is the answer not in the manual?

Cisco RV130 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
Dual-bandNo
Ethernet LAN (RJ-45) ports4
Supported network protocolsPPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management-
Security algorithmsAES
Product colorBlack
CertificationFCC, CE, IC
Input current2 A
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals