Cisco RV130 Administration Guide

Configuring Networking
Configuring IPv6
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 56
3
STEP 4 Click Save.
SLA ID If you choose 6to4 as the IPv6 prefix type, enter
the Site-Level Aggregation Identifier (SLA ID).
The SLA ID in the 6to4 address prefix is set to the
interface ID of the interface on which the
advertisements are sent.
IPv6 Prefix If you choose Global/Local as the IPv6 prefix type,
enter the IPv6 prefix. The IPv6 prefix specifies the
IPv6 network address.
IPv6 Prefix Length If you choose Global/Local as the IPv6 prefix type,
enter the prefix length. The prefix length variable is
a decimal value that indicates the number of
contiguous, higher-order bits of the address that
make up the network portion of the address.
Prefix Lifetime Prefix lifetime, or the length of time over which the
requesting router is allowed to use the prefix.

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g