Cisco RV130 Administration Guide

Getting Started
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 6
1
Quick Access
Device Status
Other Resources
Upgrade Router
Firmware
Opens the Firmware/Language Upgrade page to
update the device firmware or language pack. See
Upgrading Firmware or Changing the Language.
Add VPN Clients Opens the PPTP Server page to set up and
manage VPN tunnels. See Configuring PPTP.
Configure Remote
Management Access
Opens the Basic Settings page to enable the basic
features of the device. See Configuring Basic
Firewall Settings.
System Summary Displays the System Summary page that shows
the state of the firmware, IPv4 and IPv6
configuration status, and the status of the wireless
and the firewall on the device. See Viewing the
System Summary.
Wireless Status Displays the Wireless Statistics page that shows
the state of the radio. See Viewing Wireless
Statistics.
VPN Status Displays the IPsec VPN Server page that lists the
VPN managed by this device. See Viewing Site-
to-Site IPsec VPN Connection Status.
Support Click to open the Cisco support page.
Forums Click to visit Cisco online support forums.

Cisco RV130 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Dual-band	No
Ethernet LAN (RJ-45) ports	4
Supported network protocols	PPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management	-
Security algorithms	AES
Product color	Black
Certification	FCC, CE, IC
Input current	2 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Weight	- g