Configuring VPN
Configuring VPN Passthrough
Cisco RV215W Wireless-N VPN Firewall Administration Guide 114
9
Configuring VPN Passthrough
VPN passthrough allows VPN traffic that originates from VPN clients to pass
through the device.
To configure VPN passthrough:
STEP 1 Choose VPN > VPN Passthrough.
STEP 2 Choose the type of traffic to allow to pass through the firewall:
STEP 3 Click Save.
IPsec Check Enable to allow IP security tunnels to pass
through the device.
PPTP Check Enable to allow PPTP tunnels to pass
through the device.
L2TP Check Enable to allow Layer 2 Tunneling Protocol
(L2TP) tunnels to pass through the device.
To Next Page
Loading...
