Configuring Quality of Service (QoS)
Configuring QoS Port-Based Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 119
10
Configuring QoS Port-Based Settings
You can configure QoS settings for every LAN port on the Cisco RV215W. The
device supports 4 priority queues that allow for traffic prioritization per physical
switch port.
To configure QoS settings for the device LAN ports:
STEP 1 Choose QoS > QoS Port-Based Settings.
STEP 2 For each port in the Ethernet QoS Port-Based Settings table, enter this
information:
Trust Mode Choose one of the following options from the drop-
down menu:
• Port—This setting enables the port based
on QoS. You can then set the traffic priority
for a particular port. The traffic queue
priority starts at the lowest priority of 1 and
ends with the highest priority of 4.
• DSCP—Differentiated Services Code Point
(DSCP). Enabling this feature prioritizes the
network traffic across the LAN based on the
DSCP queue mapping on the DSCP
Settings page.
• CoS—Class of Service (CoS).
Default Traffic
Forwarding Queue for
Untrusted Devices
Choose a priority level for outbound traffic (1 to 4).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
