Cisco RV215W - Backing up the Configuration Settings

Administering Your Router
Backing Up and Restoring the System
Cisco RV215W Wireless-N VPN Firewall Administration Guide 136
11
!
CAUTION During a restore operation, do not try to go online, turn off the firewall, shut down
the PC, or use the firewall until the operation is complete. This process should take
about a minute. When the test light turns off, wait a few more seconds before using
the firewall.
Backing Up the Configuration Settings
To back up or restore the configuration:
STEP 1 Choose Administration > Backup/Restore Settings.
STEP 2 Select the configuration to back up or to clear:
STEP 3 To download the backup file to your computer, click Download.
Startup configuration Select this option to download the startup
configuration. The startup configuration is the most
current running configuration that the device uses.
If the router startup configuration has been lost, use
this page to copy the backup configuration to the
startup configuration and keep all their previous
configuration information intact.
You can download the startup configuration to
other Cisco RV215W devices for easy deployment.
Mirror configuration Select this option to instruct the device to back up
the startup configuration after 24 hours of
operation without any change in the startup
configuration.
Backup configuration Select this option to back up the current
configuration settings.