Administering Your Router
Configuring Logging
Cisco RV215W Wireless-N VPN Firewall Administration Guide 132
11
Configuring E-mail Settings
You can configure the Cisco RV215W to send event logs, new firmware alerts and
3G alerts by e-mail. We recommend that you set up a separate e-mail account for
sending and receiving e-mail alerts.
To configure e-mail settings:
STEP 1 Choose Administration > Logging > E-mail Settings.
STEP 2 In the E-mail Alert Configuration section:
• To enable sending 3G alerts by e-mail, check the 3G E-mail Alert Enable
check box.
• To enable sending logs by e-mail, check the E-mail Logs Enable check
box. Ensure that you have set severity for the events that you want to log.
For more information, see Configuring Logging Settings. The Minimum
E-mail Log Severity field displays the severity of logs that you want to
capture. To change log severity, click Configure Severity.
In the Send E-mail Logs by Schedule section, choose if you want to send
e-mail Hourly, Daily, or Weekly. If you choose Never, logs are not sent. If
you chose a weekly schedule, choose the day of the week to e-mail the
logs. If you chose a daily or weekly schedule, choose the time of day
when the device must e-mail the logs.
STEP 3 In the E-mail Settings section, enter the following information to configure settings
for your e-mail alerts:
E-mail Server Address Enter the address of the SMTP server. This is the
mail server associated with the e-mail account that
you have setup (for example,
mail.companyname.com).
E-mail Server Port Enter the SMTP server port. If your e-mail provider
requires a special port for email, enter it here.
Otherwise, use the default (25).
Return E-mail Address Enter the return e-mail address that the
Cisco RV215W will send messages to if alerts sent
from the router are not delivered to the Send-to e-
mail address.
To Next Page
Loading...
