Cisco RV215W Administration Guide

Configuring Networking
Configuring the LAN Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 38
6
STEP 4 Connect the USB dongle to the device.
Configuring the LAN Settings
The default DHCP and TCP/IP settings work for most applications. If you want
another PC on your network to be the DHCP server, or if you want to manually
configure the network settings of all of your devices, disable DHCP.
Also, instead of using a DNS server that maps Internet domain names (for example,
www.cisco.com) to IP addresses, you can use a Windows Internet Naming Service
(WINS) server. A WINS server is the equivalent of a DNS server, but uses the
NetBIOS protocol to resolve hostnames. The device includes the IP address of the
WINS server in the DHCP configuration that the device sends to DHCP clients.
If the device is connected to a modem or device that has a configured network on
the same subnet (192.168.1.x), the device automatically changes the LAN subnet
to a random subnet based on 10.x.x.x, so there is no conflict with the subnet on the
WAN side of the device.
Changing the Device Management IP Address
The local device management IP address of the device is static and defaults to
192.168.1.1.
To change the local device management IP address:
STEP 1 Choose Networking > LAN > LAN Configuration.
STEP 2 In the IPv4 section, enter this information:
STEP 3 Click Save.
VLAN The VLAN number.
Local IP Address Local LAN IP address of the device. Ensure that this
IP address is not in use by another device.
Subnet mask Subnet mask for the local IP address. The default
subnet mask is 255.255.255.0.

Cisco RV215W Specifications

General

VPN support	3DES, PPTP, L2TP
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q
VPN tunnels quantity	6
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Input current	1.67 A
Supported protocols	PPPoE, PPTP, L2TP, RSTP, NAT, DynDNS, PAT, DMZ
Security algorithms	WEP, WPA, WPA2, WPS
Antennas quantity	2
Certification	FCC Class B, CE, IC, UL, cUL, Wi-Fi, C-Tick
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Product color	Black

Weight and Dimensions

Width	150 mm
Height	30 mm
Weight	300 g