EasyManuals Logo

Cisco RV215W Administration Guide

Cisco RV215W
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Configuring Networking
Configuring IPv6
Cisco RV215W Wireless-N VPN Firewall Administration Guide 62
6
STEP 1 Select Networking > IPv6 > Tunneling.
STEP 2 In the 4 to 6 Tunneling field, check Enable.
STEP 3 Enter the local WAN IPv6 address on the device.
STEP 4 Enter the Remote IPv6 address, or the IP address of the remote endpoint.
STEP 5 Click Save.
Viewing IPv6 Tunnel Status
To view IPv6 tunnel status:
STEP 1 Choose Networking > IPv6 > IPv6 Tunnels Status.
STEP 2 Click Refresh to display the most up-to-date information.
This page displays information about the automatic tunnel set up through the
dedicated WAN interface. The table shows the name of tunnel and the IPv6
address that is created on the device.
Configuring Router Advertisement
The Router Advertisement Daemon (RADVD) on the device listens for router
solicitations in the IPv6 LAN and responds with router advertisements as required.
This is stateless IPv6 auto configuration, and the device distributes IPv6 prefixes
to all nodes on the network.
To configure the RADVD:
STEP 1 Choose Networking > IPv6 > Router Advertisement.
STEP 2 Enter this information:
RADVD Status Check Enable to enable RADVD.

Table of Contents

Other manuals for Cisco RV215W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV215W and is the answer not in the manual?

Cisco RV215W Specifications

General IconGeneral
VPN support3DES, PPTP, L2TP
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q
VPN tunnels quantity6
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi bandNo
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input current1.67 A
Supported protocolsPPPoE, PPTP, L2TP, RSTP, NAT, DynDNS, PAT, DMZ
Security algorithmsWEP, WPA, WPA2, WPS
Antennas quantity2
CertificationFCC Class B, CE, IC, UL, cUL, Wi-Fi, C-Tick
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals