Configuring the Wireless Network
Configuring Basic Wireless Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 76
7
STEP 5 To show computers and other devices on the wireless network, click
Show Client List.
STEP 6 In the Save to MAC Address Filter List field, check the box to add the device to
the list of devices to be added to the MAC Address Table.
STEP 7 Click Add to MAC to add the selected devices in the Client List Table to the
MAC Address Table.
STEP 8 Click Save to save your settings.
STEP 9 Click Back to go back to the Basic Settings page.
Configuring Time of Day Access
To further protect your network, you can restrict access to it by specifying when
users can access the network.
To configure Time of Day Access:
STEP 1 In the Wireless Table (Wireless > Basic Settings), check the box for the network
you want to configure.
STEP 2 Click Time of Day Access. The Time of Day Access page appears.
STEP 3 In the Active Time field, check Enable to enable Time of Day Access.
STEP 4 In the Start Time and Stop Time fields, specify the time of day period when
access to the network is allowed.
STEP 5 Click Save.
Configuring the Wireless Guest Network
The device supports a wireless guest network that is separated from the other
wireless SSIDs, or networks, on the router. This router provides secure guest
access that is isolated from the rest of the network, and can be configured to
restrict access time and bandwidth used. The following restrictions and
configuration guidelines apply:
• One guest network can be configured for each device.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
