Administering Your Router
Configuring Logging
Cisco RV215W Wireless-N VPN Firewall Administration Guide 131
11
STEP 5 Click Save.
To edit an entry in the Logging Setting Table, select the entry and click Edit. Make
your changes, then click Save.
Remote Log Server Enter the IP address of the log server that will
collect logs.
Log Severity for Local
Log and Email
Click to choose the severity of logs you want to
configure. Note that all log types above a selected
log type are automatically included and you cannot
deselect them. For example, choosing error logs
automatically includes emergency, alert, and
critical logs in addition to error logs.
The event severity levels are listed from the
highest severity to the lowest severity, as follows:
• Emergency—System is not usable.
• Alert—Action is needed.
• Critical—System is in a critical condition.
• Error—System is in error condition.
• Warning—System warning occurred.
• Notification—System is functioning
properly, but a system notice occurred.
• Information—Device information.
• Debugging—Provides detailed information
about an event. Choosing this severity uses
large amounts of logs to be generated and is
not recommended during normal router
operation.
Enable To enable these logging settings, check this box.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
