Configuring Networking
Configuring IPv6
Cisco RV215W Wireless-N VPN Firewall Administration Guide 54
6
To configure the device to be a DHCPv6 client:
STEP 1 Choose Networking > IPv6 > IPv6 WAN Configuration.
STEP 2 In the WAN Connection Type field, select Automatic Configuration-DHCPv6.
STEP 3 Click Save.
Configuring a Static IPv6 WAN Address
If your ISP assigns you a fixed address to access the WAN, configure the device to
use a static IPv6 address.
To configure a static IPv6 WAN address:
STEP 1 Choose Networking > IPv6 > IPv6 WAN Configuration.
STEP 2 From the WAN Connection Type menu, select Static IPv6.
STEP 3 Enter this information:
STEP 4 Click Save.
IPv6 Address IPv6 address of the WAN port.
IPv6 Prefix Length Length of the IPv6 prefix (typically defined by the
ISP). The IPv6 network (subnet) is identified by the
initial bits of the address called the prefix. All hosts
in the subnetwork have the identical prefix.
For example, in the IPv6 address
2001:0DB8:AC10:FE01:: the prefix is 2001.
Default IPv6 Gateway IPv6 address of the default gateway. This is
typically the IP address of the server at the ISP.
Static DNS 1 IP address of the primary IPv6 DNS server.
Static DNS 2 IP address of the secondary IPv6 DNS server.