4-15
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 4 Setting Up and Managing Network Configuration
AAA Server Configuration
Note Restarting the service clears the Logged-in User report and
temporarily interrupts all Cisco Secure ACS services. As an
alternative to restarting when you delete a AAA client, you can click
Delete. However, when you do this, the change does not take effect
until you restart the system, which you can do by clicking System
Configuration, clicking Service Control, and then clicking Restart.
Result: A confirmation dialog box appears.
Step 4 Click OK.
Result: Cisco Secure ACS performs a restart and the AAA client is deleted.
AAA Server Configuration
This section presents procedures for configuring AAA servers in the
Cisco Secure ACS. For additional information about AAA servers, see the AAA
Servers in Distributed Systems, page 4-3.
To configure distributed system features for a given Cisco Secure ACS server, you
must first define the other AAA server(s).
Tip If the AAA Servers table does not appear, click Interface Configuration, click
Advanced Options, and then select the Distributed System Settings check box.
Details on working with AAA servers are given in the following procedures:
• Adding and Configuring a AAA Server, page 4-16
• Editing a AAA Server Configuration, page 4-18
• Deleting a AAA Server, page 4-20
To Next Page
Loading...
Need help?
General