Cisco Servers User Manual

E-31
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Appendix E Cisco SecureACS Command-Line Database Utility
User-Defined RADIUS Vendors and VSA Sets
To list all custom RADIUS vendors defined in Cisco Secure ACS, follow these
steps:
Step 1 On the Cisco Secure ACS server, open an MS DOS command prompt and change
directories to the directory containing CSUtil.exe. For more information about the
location of CSUtil.exe, see the “Location of CSUtil.exe and Related Files” section
on page E-2.
Step 2 Type:
CSUtil.exe -listUDV
Press Enter.
Result: CSUtil.exe lists each user-defined RADIUS vendor slot in slot number
order. CSUtil.exe lists slots that do not contain a custom RADIUS vendor as
"Unassigned". An unassigned slot is empty. You can add a custom RADIUS
vendor to any slot listed as "Unassigned".
RADIUS Vendor/VSA Import File
To import a custom RADIUS vendor and VSA set into Cisco Secure ACS, you
must define the RADIUS vendor and VSA set in an import file.
We recommend that you archive RADIUS vendor/VSA import files. During
upgrades, the
Utils directory, where CSUtil.exe is located, is replaced, including
all its contents. Backing up RADIUS vendor/VSA import files ensures that you
can recover your custom RADIUS vendors and VSAs after reinstallation or
upgrading to a later release.
This section details the format and content of RADIUS VSA import files. It
includes the following topics:
• About the RADIUS Vendor/VSA Import File, page E-32
• Vendor and VSA Set Definition, page E-33
• Attribute Definition, page E-34
• Enumeration Definition, page E-35
• Example RADIUS Vendor/VSA Import File, page E-37

Cisco Servers Specifications

General

Brand	Cisco
Model	Servers
Category	Software
Language	English