Chapter 7 Setting Up and Managing User Accounts
User Setup Features and Functions
7-2
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
• Advanced User Authentication Settings, page 7-23—Details on the steps
necessary to configure a user account for authentication outside the system
using the TACACS+ or RADIUS protocol options.
• User Management, page 7-51—Information about viewing, disabling, and
resetting user accounts.
User Setup Features and Functions
The User Setup section of the Cisco Secure ACS HTML interface is the
centralized location for all operations regarding user account configuration and
administration.
From within the User Setup section, you can perform the following tasks:
• View a list of all users in the CiscoSecure user database
• Find a user
• Add a user
• Assign the user to a group, including Voice over IP (VoIP) Groups
• Edit user account information
• Establish or change user authentication type
• Configure callback information for the user
• Set network access restrictions (NARs) for the user
• Configure Advanced Settings
• Set the maximum number of concurrent sessions (Max Sessions) for the user
• Disable or re-enable the user account
• Delete the user
To Next Page
Loading...
Need help?
General