E-29
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Appendix E Cisco SecureACS Command-Line Database Utility
User-Defined RADIUS Vendors and VSA Sets
Step 3 To confirm that you want to add the RADIUS vendor and halt all
Cisco Secure ACS services during the process, type Y and press Enter.
Result: CSUtil.exe halts Cisco Secure ACS services, parses the vendor/VSA input
file, and adds the new RADIUS vendor and VSAs to Cisco Secure ACS. This
process may take a few minutes. After it is complete, CSUtil.exe restarts
Cisco Secure ACS services.
Note We recommend that you archive RADIUS vendor/VSA import files. During
upgrades, the Utils directory, where CSUtil.exe is located, is replaced,
including all its contents. Backing up RADIUS vendor/VSA import files
ensures that you can recover your custom RADIUS vendors and VSAs after
reinstallation or upgrading to a later release.
Deleting a Custom RADIUS Vendor and VSA Set
You can use the -delUDV option to delete a custom RADIUS vendor from
Cisco Secure ACS.
Note While CSUtil.exe deletes a custom RADIUS vendor from Cisco Secure ACS,
all Cisco Secure ACS services are automatically stopped and restarted. No
users are authenticated while this process is occurring.
Before You Begin
Verify that, in the Network Configuration section of the Cisco Secure ACS HTML
interface, no AAA client uses the RADIUS vendor. For more information about
configuring AAA clients, see the “AAA Client Configuration” section on
page 4-8.
Verify that your RADIUS accounting log does not contain attributes from the
RADIUS vendor you want to delete. For more information about configuring your
RADIUS accounting log, see the “RADIUS Accounting Log” section on
page 9-7.
To Next Page
Loading...
Need help?
General