9-17
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 9 Working with Logging and Reports
About Cisco Secure ACS Logs and Reports
Administration Audit Log
The Administration Audit log lists actions taken by each system administrator,
such as adding users, editing groups, configuring a AAA client, or viewing
reports.
Topics regarding this log include the following:
• Enabling the Administration Audit Log—The Administration Audit log is
always enabled. You cannot disable this log.
• Viewing an Administration Audit Report—For instructions on viewing the
Administration Audit report in the HTML interface, see the “Viewing a CSV
Report” section on page 9-20.
• Configuring the Administration Audit Log—The Administration Audit log
is available as a CSV file, viewable in the HTML interface.
The default location for Administration Audit files is
Program Files\CiscoSecure ACS vx.x\Logs\AdminAudit.
For instructions on configuring the Administration Audit log, see the
“Configuring the Administration Audit Log” section on page 9-17.
Configuring the Administration Audit Log
To configure the Administrative Audit log, follow these steps:
Step 1 In the navigation bar, click Administration Control.
Step 2 Click Audit Policy.
Result: The Audit Policy Setup page appears.
Step 3 To generate a new Administrative Audit CSV file at a regular interval, select one
of the following options:
• Every day—Cisco Secure ACS generates a new Administrative Audit CSV
file at the start of each day.
• Every week—Cisco Secure ACS generates a new Administrative Audit CSV
file at the start of each week.
• Every month—Cisco Secure ACS generates a new Administrative Audit
CSV file at the start of each month.
To Next Page
Loading...
Need help?
General