11-55
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 11 Working with User Databases
Token Server User Databases
Step 7 Click Submit.
Result: Cisco Secure ACS saves the SafeWord token server database
configuration you created. You can add it to your Unknown User Policy or assign
specific user accounts to use this database for authentication. For more
information about the Unknown User Policy, see the “Unknown User Processing”
section on page 12-1. For more information about configuring user accounts to
authenticate using this database, see Chapter 7, “Setting Up and Managing User
Accounts.”
Configuring an AXENT Token Server External User Database AXENT
Cisco Secure ACS supports the AXENT token server custom interface for
authentication of users. You can create only one AXENT configuration within
Cisco Secure ACS.
Before You Begin
You should install and configure your AXENT token server before configuring
Cisco Secure ACS to authenticate users with it. For information about installing
the AXENT server, refer to the documentation included with your token server.
To configure Cisco Secure ACS to authenticate users with an AXENT token
server, follow these steps:
Step 1 In the navigation bar, click External User Databases.
Step 2 Click Database Configuration.
Result: Cisco Secure ACS displays a list of all possible external user database
types.
Step 3 Click AXENT Token Server.
Result: If no AXENT token server configuration exists, the Database
Configuration Creation table appears. Otherwise, the External User Database
Configuration page appears.
To Next Page
Loading...
Need help?
General