Chapter 8 Establishing Cisco Secure ACS System Configuration
Cisco Secure ACS Certificate Setup
8-66
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Step 6 Open a browser window and navigate to the web site of your CA. Then copy the
encoded certificate signing request from Cisco Secure ACS and paste it into the
CA submission form, as applicable.
Result: The CA receives the request and issues a certificate.
Tip Typically, the CA generates the certificate and provides the means for you to
download it.
Installing Cisco Secure ACS Certification with Manual
Enrollment
You perform this procedure to install a Cisco Secure ACS certificate.
Before You Begin
You must have a server certificate for your Cisco Secure ACS before you can
install it. You can use the procedure in the “Generating a Request for a
Certificate” section on page 8-64, or any other means to obtain a certificate for
manual installation.
If you are using Microsoft Windows 2000 Certificate Services to obtain your
server certificate, you can do it using the procedure in the “Installing
Cisco Secure ACS Certification with Automatic Enrollment” section on
page 8-68, or you can generate the request using the MS Certificate Services web
interface. For more information refer to the “EAP-TLS Deployment Guide,”
which can be found on the Cisco Secure ACS Product Literature site:
http://www.cisco.com/warp/public/cc/pd/sqsw/sq/prodlit/index.shtml
To install an existing certificate for use on Cisco Secure ACS, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click ACS Certificate Setup.
Result: Cisco Secure ACS displays the Install new certificate table on the ACS
Certificate Setup page.
Step 3 Select the Manual certificate enrollment option.
To Next Page
Loading...
Need help?
General