Chapter 7 Setting Up and Managing User Accounts
User Management
7-56
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Note Alternatively, you can click List All Users and then select the user
from the list that appears.
Step 3 Click Add/Edit.
Step 4 In the Account Disable table, select the Reset current failed attempts count on
submit check box, and then click Submit.
Result: The Failed attempts since last successful login: counter resets to 0 (zero)
and the system re-enables the account.
Note This counter shows the number of unsuccessful login attempts since the last
time this user logged in successfully.
Note If the user authenticates with a Windows NT/2000 external user database, this
expiration information is in addition to the information in the
Windows NT/2000 user account. Changes here do not alter settings configured
in Windows NT/2000.
Saving User Settings
After you have completed configuration for a user, be sure to save your work.
To save the configuration for the current user, follow these steps:
Step 1 To save the user account configuration, click Submit.
Step 2 To verify that your changes were applied, type the username in the User box and
click Add/Edit, and then review the settings.
To Next Page
Loading...
Need help?
General