10-15
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 10 Setting Up and Managing Administrators and Policy
Session Policy
Step 4 Set the automatic local login policy:
a. To allow administrators to login to Cisco Secure ACS locally without using
their administrator names and passwords, select the Allow Automatic Local
Login check box.
b. To require administrators to login to Cisco Secure ACS locally using their
administrator names and passwords, clear the Allow Automatic Local Login
check box.
Step 5 Set the invalid IP address response policy:
a. To configure Cisco Secure ACS to respond with a message when an
administrative session is requested from an invalid IP address, select the
Respond to invalid IP address connections check box.
b. To configure Cisco Secure ACS to send no message when an administrative
session is requested from an invalid IP address, clear the Respond to invalid
IP address connections check box.
Step 6 Set the failed administrative login attempts policy:
a. To enable Cisco Secure ACS to lockout an administrator after a number of
successive failed administrative login attempts, select the Lock out
Administrator after x successive failed attempts check box.
b. In the x box, type the number of successive failed login attempts after which
Cisco Secure ACS locks out an administrator. To allow unlimited failed
administrative login attempts, type 0 (zero).
Note If the Lock out Administrator after x successive failed attempts
check box is selected, the x box cannot be set to zero.
Step 7 Click Submit.
Result: Cisco Secure ACS saves and begins enforcing the session policy settings
you made.
To Next Page
Loading...
Need help?
General