Cisco Servers - Page 441

11-51
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 11 Working with User Databases
Token Server User Databases
To configure Cisco Secure ACS to authenticate users with a ActivCard token
server, CRYPTOCard token server, Vasco token server, or generic RADIUS
Token Sever, follow these steps:
Step 1 In the navigation bar, click External User Databases.
Step 2 Click Database Configuration.
Result: Cisco Secure ACS displays a list of all possible external user database
types. The external user databases that represent RADIUS-enabled token servers
are as follows:
• ActivCard
• CRYPTOCard
• RADIUS Token Server
• Vasco
Step 3 Click the link for the applicable RADIUS-enabled token server.
Result: The Database Configuration Creation table appears. If at least one
configuration exists for the selected external user database type, the External User
Database Configuration table also appears.
Step 4 If you are creating a configuration, follow these steps:
a. Click Create New Configuration.
b. Type a name for the new configuration for the RADIUS-enabled token server
in the box provided, or accept the default name in the box.
c. Click Submit.
Result: Cisco Secure ACS lists the new configuration in the External User
Database Configuration table.
Step 5 Under External User Database Configuration, select the name of the
RADIUS-enabled token server you need to configure.
Note If only one RADIUS-enabled token server configuration exists, the
name of that configuration appears instead of the list. Continue with
Step 6.