EasyManua.ls Logo

Cisco Servers - Page 519

Cisco Servers
654 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D-13
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Appendix D RADIUS Attributes
IETF Dictionary of RADIUS AV Pairs
6 Service-Type Type of service requested or type of service to be provided:
In a request:
FramedFor known PPP or SLIP (Serial Line Internet Protocol)
connection.
Administrative UserFor enable command.
In a response:
LoginMake a connection.
FramedStart SLIP or PPP.
Administrative UserStart an EXEC or enable ok.
Exec UserStart an EXEC session.
7 Framed-Protocol Framing to be used for framed access.
8 Framed-IP-Address Address to be configured for the user.
9 Framed-IP-Netmask IP netmask to be configured for the user when the user is a router to a
network. This attribute-value results in a static route being added for
Framed-IP-Address with the mask specified.
10 Framed-Routing Routing method for the user when the user is a router to a network. Only
None and Send and Listen values are supported for this attribute.
11 Filter-Id Name of the filter list for the user, formatted as follows: %d, %d.in, or
%d.out. This attribute is associated with the most recent service-type
command. For login and EXEC, use %d or %d.out as the line access list
value from 0 to 199. For Framed service, use %d or %d.out as interface
output access list and %d.in for input access list. The numbers are
self-encoding to the protocol to which they refer.
12 Framed-MTU Indicates the maximum transmission unit (MTU) that can be configured
for the user when the MTU is not negotiated by PPP or some other
means.
13 Framed-Compression Compression protocol used for the link. This attribute results in
"/compress" being added to the PPP or SLIP autocommand generated
during EXEC authorization. Not currently implemented for non-EXEC
authorization.
Table D-7 RADIUS (IETF) Attributes (continued)
No. Attribute Description

Table of Contents

Related product manuals