Appendix G ODBC Import Definitions
Action Codes
G-6
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
use these action codes for other purposes by a Cisco representative, you can only
use these action codes for assigning values to user-defined fields (see the
“User-Specific Attributes” section on page G-31).
Table G-2 Action Codes for Setting and Deleting Values
Action
Code Name Required Description
1 SET_VALUE UN|GN, AI, VN, V1, V2 Sets a value (V1) named (VN) of type (V2) for app
(AI).
App IDs (AI) can be one of the following:
• APP_CSAUTH
• APP_CSTACACS
• APP_CSRADIUS
• APP_CSADMIN
Value types (V2) can be one of the following:
• TYPE_BYTE—Single 8-bit number.
• TYPE_SHORT—Single 16-bit number.
• TYPE_INT—Single 32-bit number.
• TYPE_STRING—Single string.
• TYPE_ENCRYPTED_STRING—Single
string to be saved encrypted.
• TYPE_MULTI_STRING—Tab-separated set
of substrings.
• TYPE_MULTI_INT—Tab-separated set of
32-bit numbers.
For example:
UN="fred"
AI="APP_CSAUTH"
VN="My Value"
V2="TYPE_MULTI_STRING"
V1="str1<tab>str2<tab>str3"
To Next Page