Cisco Servers User Manual

Appendix G ODBC Import Definitions
Action Codes
G-26
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
176 ADD_IOS_
COMMAND_
ARG
UN|GN, VN,
V1, V2
Specifies a set of command-line arguments that are
either permitted or denied for the Cisco IOS command
contained in VN. The command must have already
been added via Action 174:
GN=“Group 1"
VN=“telnet”
V1=“permit”
V2=“10.1.1.2”
or
UN=“fred”
VN=“show”
V1=“deny”
V2=“run”
The first example will allow the telnet command with
argument 10.1.1.2 to be used by any user in Group 1.
The second example ensures that user fred cannot
issue the Cisco IOS command show run.
177 REMOVE_IOS_
COMMAND_
ARG
UN|GN, VN,
V2
Remove the permit or deny entry for the given
Cisco IOS command argument:
GN=“Group 1"
VN=“telnet”
V2=“10.1.1.1”
or
UN=“fred”
VN=“show”
V2=“run”
Table G-5 Action Codes for Modifying TACACS+ and RADIUS Group and User Settings (continued)
Action
Code Name Required Description

Cisco Servers Specifications

General

Brand	Cisco
Model	Servers
Category	Software
Language	English