Cisco Small Business SPA509G - Page 231

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 230
B
Primary NTP Server
(Cisco SPA525G/525G2 only)
IP Address of the primary NTP server.
Secondary NTP Server
(Cisco SPA525G/525G2 only)
IP Address of the secondary NTP server.
TFTP Server
(Cisco SPA525G/525G2 only)
Address of the TFTP server for provisioning.
Bluetooth Enabled
(Cisco SPA525G/525G2 only)
Shows if Bluetooth is enabled.
Bluetooth Firmware Version
(Cisco SPA525G/525G2 only)
Displays the Bluetooth firmware version.
Bluetooth Connected
(Cisco SPA525G/525G2 only)
Shows if a Bluetooth device is connected to the phone.
Bluetooth MAC
(Cisco SPA525G/525G2 only)
Shows the hardware address of the Bluetooth device.
Connected Device ID
(Cisco SPA525G/525G2 only)
Shows the name of the connected Bluetooth device.
Wireless Enabled
(Cisco SPA525G/525G2 only)
Shows if Wireless-G is enabled on the phone.
Wireless Connected
(Cisco SPA525G/525G2 only)
Shows if the phone is connected to the wireless
network.
Wireless MAC
(Cisco SPA525G/525G2 only)
Shows the hardware address of the Wireless-G
controller.
SSID
(Cisco SPA525G/525G2 only)
Shows the SSID, or name of the wireless router to
which the phone is connected.
Standard Channel
(Cisco SPA525G/525G2 only)
Shows the wireless channel being used in the wireless
connection.
Security Mode
(Cisco SPA525G/525G2 only)
Shows if wireless security is configured on the phone
(yes or no).
Parameter Description