Cisco Small Business SPA509G - Auto Input Gain (Db); Ring Tone (WIP310)

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 291
B
These four ring tones must be provisioned or configured using the phone’s Web
GUI.
Ring Tone (WIP310)
Auto Input Gain (dB)
NOTE Does not apply to the WIP310.
Low
(SPA50X/SPA30X)
w=8
(SPA525G/525G2)
w=file://Low.raw
Floor
(SPA50X/SPA30X)
w=9
(SPA525G/525G2)
w=file://Floor.raw
Reverb
(SPA50X/SPA30X)
w=10
(SPA525G/525G2)
w=file://Reverb.raw
GUI Label Value of the w Parameter
Parameter Description
Keypad Tone Select yes to enable the keypad tone to be played
when a key on the keypad is pressed. Select no to
silence the keypad.
Keypad Tone Volume Corresponds to the volume of the keypad tone.
Default is 5.