Cisco Small Business SPA509G - Configuring Unused Line Keys to Access Services

Configuring Lines and Extensions
Configuring Lines
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 42
2
To configure:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login.
STEP 3 Click advanced.
STEP 4 Click the Attendant Console tab.
STEP 5 Set the Call Pickup Audio Notification to Ye s,
To configure this parameter using the configuration file, configure the following line
to your configuration file:
<Call_Pickup_Audio_Notification ua="na">Yes
</Call_Pickup_Audio_Notification>
STEP 6 Click the Regional tab.
The default value for this parameter is 440@-10;30(.3/9.7/1), which is the same as
the call waiting tone.
To configure this parameter using the configuration file, configure the following line
to your configuration file:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/1)</Call_Pickup_Tone>
STEP 7 Click Submit All Changes.
Configuring Unused Line Keys to Access Services
On the Cisco SPA300 Series or Cisco SPA500 Series IP Phones, unused or idle
phone lines can also be configured to access services, such as the following:
• XML services
• MP3 player (Cisco SPA525G/525G2)
• Weather (RSS)
• News (RSS)
To configure line keys to access services: