Cisco Small Business SPA509G - Configuring Audio Settings; Configuring Audio Input Gain (Cisco SPA300 Series and Cisco SPA500 Series)

Customizing Cisco SPA and Wireless IP Phones
Configuring Audio Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 78
3
Configuring Audio Settings
You can configure default audio volume settings for the phone. These settings can
be modified by the user by pressing the volume control button on the phone, then
pressing the Save soft button. (Not applicable to the WIP310.)
To configure the audio volume settings:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the User tab. You can configure the following settings:
STEP 4 Click Submit All Changes.
Configuring Audio Input Gain (Cisco SPA300 Series and
Cisco SPA500 Series)
You can amplify or deamplify the sound on your phone’s handset, headset, and
speakerphone.
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
Parameter Description
Ringer Volume Sets the volume for the ringer.
Speaker Volume Sets the volume for the full-duplex
speakerphone.
Handset Volume Sets the volume for the handset.
Headset Volume Sets the volume for the headset.
Bluetooth Volume Sets the volume for the Bluetooth device.
NOTE Applies to Cisco SPA525G/525G2 only.