Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 281
B
Text Logo Text logo to display when the phone boots up. A
service provider, for example, can enter logo text as
follows:
•Up to 2 lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) between lines
•Insert escape code %0a
For example, “Super\n%0aTelecom” will display:
Super
Telecom
Use the + character to add spaces for formatting. For
example, you can add multiple + characters before and
after the text to center it.
NOTE Not applicable to the WIP310, SPA301, or
SPA501. On the Cisco SPA525G/525G2, this setting is
located in the User tab. See Screen (Cisco SPA525G/
525G2), page 321.
BMP Picture Download URL URL locating the bitmap (.BMP) file to display on the
LCD background.
For more information, see the “Configuring Phone
Information and Display Settings” section on
page 49
.
NOTE Not applicable to the WIP310 or SPA301. On
the Cisco SPA525G/525G2, this setting is located in
the User tab. See Screen (Cisco SPA525G/525G2),
page 321.
Select Logo Select from Default, BMP Picture, Text Logo, or None.
Defaults to Default.
NOTE Not applicable to the WIP310, SPA301, or
SPA501. On the Cisco SPA525G/525G2, this setting is
located in the User tab. See Screen (Cisco SPA525G/
525G2), page 321.
Parameter Description
To Next Page
Loading...
