Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 4
 
Contents
Configuring BroadSoft Settings (Cisco SPA300 Series and Cisco SPA500 
Series) 92
Configuring BroadSoft Directory 92
Configuring Synchronization of Do Not Disturb and Call Forward on a Per Line 
Basis (Applicable to Broadsoft) 93
Configuring Synchronization of DND and CEWD Using the Configuration Util-
ity 94
Configuring Synchronization of DND and CEWD Using the Configuration File
94
Configuring Broadsoft ACD Support 94
Configuring Broadsoft ACD Support Using the Configuration Utility 95
Configuring Broadsoft ACD Support Using the Configuration File 95
Configuring XML Services 95
Configuring Music On Hold 98
Configuring Extension Mobility 98
Configuring Video Surveillance on the Cisco SPA525G/525G2 99
Configuring the User Name and Account on the Camera 100
Entering Camera Information Into the Cisco SPA525G/525G2 Configuration 
Utility 100
Viewing the Video 101
Chapter 4: Configuring SIP, SPCP, and NAT 102
Session Initiation Protocol and Cisco IP Phones 102
SIP Over TCP 103
SIP Proxy Redundancy 104
Configuring Survivable Remote Site Telephony (SRST) Support 104
RFC3311 Support 104
Support for SIP NOTIFY XML-Service 105
Configuring SIP 105
Configuring SIP Parameters 105
Configuring SIP Timer Values 109
Configuring Response Status Code Handling 112
Configuring RTP Parameters 112
Configuring SDP Payload Types 114