Cisco Small Business SPA509G - Page 72

Customizing Cisco SPA and Wireless IP Phones
Customizing Phone Softkeys
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 71
3
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under Programmable Softkey Enable, choose yes.
STEP 5 In the Programmable Softkeys section, edit the following:
• Programmable Softkey Enable: yes
• PSK1: fnc=sd;ext=200@$PROXY;vid=2;nme=Sales
• Idle Key List: Edit the field to add psk1|1 to the beginning of the string; for
example:
psk1|1;em_login;acd_login;acd_logout;avail;unavail;
redial;dir;cfwd;dnd;lcr;pickup;gpickup;unpark;em_logout;
• Off Hook Key List: Edit the field to add psk1|1 to the beginning of the string;
for example:
psk1|1;option;redial;dir;cfwd;dnd;lcr;unpark;pickup;
gpickup;
• Connected Key List: Edit the field to add psk1|1 to the string, editing the
existing
softkeyname |1 to PSK1. For example, the original string:
hold|1;endcall|2;conf|3;xfer|4;bxfer;confLx;xferLx;park;p
hold;flash;
becomes:
psk|1;hold|2;endcall|3;conf|4;xfer;bxfer;confLx;xferLx;
park;phold;flash
STEP 6 Click Submit All Changes. The “Sales” speed dial softkey is displayed in the lower
left of the screen when the phone is idle, when the phone is connected on a call,
and when the phone is off hook.