Customizing Cisco SPA and Wireless IP Phones
Configuring XML Services
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 97
3
• MAC Address—MA
• Product Name—PN
• Product Series Number—PSN
• Serial Number—SERIAL_NUMBER
For more information on XML support, see the Cisco Small Business Support
community. The URL is given in Appendix C, “Where to Go From Here.”
To configure the phone to connect to an XML Directory service:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Enter the following information:
• XML Directory Service Name: Name of the XML Directory. Displays on the
user’s phone as a directory choice.
• XML Directory Service URL: URL where the XML Directory is located.
STEP 5 Click Submit All Changes.
To configure the phone to connect to an XML application:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Enter the following information:
• XML Application Service Name: Name of the XML application. Displays on
the user’s phone as a menu item.
• XML Application Service URL: URL where the XML application is located.
NOTE If you have configured an unused line button to connect to an XML
application, the button connects to the URL configured here, unless you
enter a different URL when configuring the line button. See the “Configuring
Unused Line Keys to Access Services” section on page 42.
To Next Page
Loading...
