Contents
xi
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Configuring IEEE 802.3X Flow Control 10-14
Configuring Auto-MDIX on an Interface 10-15
Configuring Power over Ethernet on an Interface 10-16
Adding a Description for an Interface 10-18
Configuring Layer 3 Interfaces 10-19
Configuring the System MTU 10-20
Monitoring and Maintaining the Interfaces 10-22
Monitoring Interface Status 10-22
Clearing and Resetting Interfaces and Counters 10-23
Shutting Down and Restarting the Interface 10-23
CHAPTER
11 Configuring SmartPort Macros 11-1
Understanding SmartPort Macros 11-1
Configuring Smart-Port Macros 11-2
Default SmartPort Macro Configuration 11-2
SmartPort Macro Configuration Guidelines 11-2
Creating and Applying SmartPort Macros 11-3
Displaying SmartPort Macros 11-4
CHAPTER
12 Configuring VLANs 12-1
Understanding VLANs 12-1
Supported VLANs 12-3
VLAN Port Membership Modes 12-3
Configuring Normal-Range VLANs 12-4
Token Ring VLANs 12-5
Normal-Range VLAN Configuration Guidelines 12-6
VLAN Configuration Mode Options 12-6
VLAN Configuration in config-vlan Mode 12-7
VLAN Configuration in VLAN Database Configuration Mode 12-7
Saving VLAN Configuration 12-7
Default Ethernet VLAN Configuration 12-8
Creating or Modifying an Ethernet VLAN 12-8
Deleting a VLAN 12-10
Assigning Static-Access Ports to a VLAN 12-11