FreeSpeak II for Eclipse | User Guide
l
The transceiver network that provides custom coverage zones in which beltpacks can
operate. Beltpacks can roam freely between coverage zones.
FS II also includes a drop-in battery charger for the beltpack Li-Ion batteries. You can
conveniently charge the battery by placing the whole beltpack into the charger, or by placing
individual batteries into the charger.
FS II operates using a cellular network of transceivers located around a working environment.
The transceivers connect to the matrix via an E-IPA-HX or E-Que card installed on the matrix.
Each transceiver provides an area or cell in which up to ten full-duplex beltpacks can operate.
Beltpacks can roam among and between cells without disconnecting because each beltpack
continually detects which transceiver has the strongest available signal. When the signal from a
transceiver starts to diminish due to the distance from a beltpack, the beltpack automatically
“hands off” its signal to the nearest transceiver, ensuring smooth transfer.
Page 10
To Next Page
Loading...
