FreeSpeak II for Eclipse | User Guide
8.4 Splitter (FSII-SPL) front panel
See also:
Splitter (FSII-SPL) rear connectors on page 98
Using the FreeSpeak II for Eclipse splitter (FSII-SPL) on page 96
8.5 Using a transceiver with a fiber connection
You may wish to connect a FreeSpeak II for Eclipse to a splitter (FSII-SPL) using Fiber. In this
case, you need to install Fiber modules to the Base and the splitter.
l
Modules are available for single mode Fiber cable (HLI-SMFO) and multi-mode Fiber
cable (HLI-MMFO)
l
Modules are supplied as a pair, one for the Base Station and one for the splitter.
l
Modules can be hot patched, no need to power off devices.
Page 99
To Next Page
Loading...
Need help?
General
